Table of Contents
Advertisement
5-Tone
This radio can realize various types of calls through 5-Tone signaling.
Encoding:
1.
Request your dealer to configure the correct format and type for the encoding contents.
2.
When the format consists of fields for variable information, you need to fill in such fields by manual
entry or menu operation.
When the format consists of fixed codes only, you do not have to edit such fields or save such data.
3.
Press PTT key or the programmed One Touch Call 1-One Touch Call 5 keys to send the 5-Tone
signaling.
During encoding, the radio sounds a side tone, the LED glows red, and the LCD displays the contact
information (or "Five Tone Call") and an appropriate call icon (Private Call:
). If Auto Reset is enabled (by your dealer), your radio will enter the Auto Reset mode after
successful encoding, with LED glowing orange, until the Auto Reset Time expires.
Decoding:
Your radio can automatically decode the 5-Tone signaling when receiving any matched one.
During decoding, the LED glows green. After successful decoding, the LCD displays the contact
information (or "Five Tone Call"), an appropriate call icon (Private Call:
the decoded status message. If Auto Reset is enabled (by your dealer), your radio will enter the Auto
Reset mode, with LED glowing orange, until the Auto Reset Time expires.
2-Tone
With this signaling, the radio can transmit and receive 2-Tone calls.
Encoding:
1.
Request your dealer to configure the correct format and type for the encoding contents.
2.
Press PTT key or the programmed One Touch Call 1-One Touch Call 5 keys to send the 5-Tone
signaling.
During encoding, the radio sounds a side tone, the LED glows red, and the LCD displays the call icon
with contact information above it. If Auto Reset is enabled (by your dealer), your radio will enter
the Auto Reset mode after successful encoding, with LED glowing orange, until the Auto Reset Time
; Group Call:
; Group Call:
), and
46
Advertisement
Table of Contents
