TC- 446S
TC- 446S
Before Use
Assembling the Accessories
Attaching the Battery
1. Push the battery into the radio's slot;
2. Slightly press the bottom of the battery until a click is
heard.
To remove the battery, turn off the radio first. Then slide the
battery latch upward to release the battery.
Attaching the Belt Clip
1. Remove the screws;
2. Align the screw holes on the belt clip with those on the
radio's body, and then tighten the screws.
6
To remove the belt clip, loosen the screws.
Attaching the Audio Accessory/Programming
Cable
1. Uncover the accessory jack;
2. Plug an audio accessory/programming cable into the
accessory jack (if it is an audio accessory, remember to
tighten the screw).