Reverse Power; Grounding; Specifications - Comtech EF Data XTD-400C Operation And Installation Manual

Reverse Power

The Reverse Power Fault is set to Active Low when the reflected power
exceeds P
specification in Appendix A for detailed specifications of your apmplifier.

Grounding

MNC-0300-036
EAR EXPORT CONTROLLED: The information contained in this Manual refers or relates to a product that is subject
to the U.S. Export Administration Regulations (EAR). Transfer of data herein by any means to a Foreign Person,
whether in the U.S. or abroad, may require an export license from the U.S. Department of Commerce.
Figure 18, Typical RS-485 4-Wire Full Duplex Implementation
-7 dB, Prated -10 dB in some applications. Refer to the
rated
To prevent Electric Shock the amplifier should be securely
connected to the grounding stud. Failure to comply could
result in personnel injury or death.
Zur Vermeidung elektrischer Schläge sollte der Verstärker
fest mit dem Erdungsbolzen verbunden werden.
Nichtbeachtung kann die Verletzung oder den Tod von
Menschen verursachen.
24 of 26
Unpacking and Installation
WARNING
WARNUNG
Revision E