Factory Default Settings - Comtech EF Data XTD-400C Operation And Installation Manual

upconverter fault when the fault condition is corrected, by enabling
the Auto Clear Upconverter Fault feature.

Factory Default Settings:

The factory default settings of the upconverter and reference
frequency are listed below in Table 1. These settings have been
chosen to allow HPA functionality with the simplest setup.
Fault/Feature Description
Upconverter Fault
Auto-Clear Upconverter Fault
External Reference Present
External Reference Lock
MNC-0000-015
EAR EXPORT CONTROLLED: The information contained in this Manual refers or relates to a product that is subject
to the U.S. Export Administration Regulations (EAR). Transfer of data herein by any means to a Foreign Person,
whether in the U.S. or abroad, may require an export license from the U.S. Department of Commerce.
Table 1, Factory Default Configuration
Default State Fault/Event Log Abbreviation
Enabled
(On)
Enabled
(On)
Disabled
(Off)
Disabled
(Off)
10 of 10
Operation Addendum, Block Upconverter
UC Fault
N/A
Ext Ref Pres
Ext Ref Lock
Revision F