Removing The Thp V-Vol To Be Registered - HP XP7 User Manual

Procedure
1. Open the Pools window.
In Command View Advanced Edition:
a. On the Resources tab, click Storage Systems, and then expand All Storage Systems.
b. Expand the target storage system, right-click THP Pools, and then select System GUI.
In Remote Web Console:
a. Click Storage Systems, and then expand the Storage Systems tree.
b. Click Pools.
2. On the Pools tab, click Create LDEVs.
3. In the Selected LDEVs table of the Create LDEVs window, select an LDEV, and then click Change
LDEV Settings.
4. In the Change LDEV Settingswindow, you can change the setting of LDEV Name, Initial LDEV
ID, or MP Blade.
If you change LDEV Name, specify the prefix characters and the initial number for this
LDEV.
If you change Initial LDEV ID, specify the number of LDKC, CU, DEV, and Interval. To
check used LDEVs, click View LDEV IDsto confirm the used LDEVs.
CAUTION:
following conditions:
◦
◦
If you change MP Blade, click the list and specify the MP blade ID. If the specific MP
blade is specified, select the MP blade ID. If any MP blade is specified, click Auto.
5. Change the settings, then click OK.
6. In the Create LDEVswindow, click Finish.
7. In the Confirm window, click Apply.
If Go to tasks window for status is checked, the Tasks window opens.

Removing the THP V-VOL to be registered

If you do not want to register the THP V-VOL, you can remove it from the registering task.
Prerequisites
The Storage Administrator (Provisioning) role is required to perform this task.
Procedure
1. Open the Create LDEVs window.
In Command View Advanced Edition:
a. On the Resources tab, click Storage Systems, and then expand All Storage Systems.
b. Expand the target storage system, right-click THP Pools, and then select System GUI.
In Remote Web Console:
a. Click Storage Systems, and then expand the Storage Systems tree.
b. Click Pools.
2. On the Pools tab, click Create LDEVs.
You cannot change the LDEV ID when you select a TSE-VOL in one of the
Selecting TSE-VOLs and other volumes at the same time.
Selecting together the TSE-VOL related to the pool whose ID is the odd number and
the TSE-VOL related to the pool whose ID is the even number.
Working with THP V-VOLs 133