HP XP7 User Manual page 213

Parity Groups tab
Item
Parity Group ID
LDEV Status
RAID Level
Base Emulation Type
Capacity
Number of LDEVs
Drive Type/RPM
Encryption
Attribute
Resource Group Name (ID)
Virtual Storage Machine*
Create LDEVs
Format LDEVs
Description
Parity group identifier of the parity group in the storage system.
Status of each LDEV in the parity group.
Normal: Normal status.
Blocked: Host cannot access a blocked volume.
Warning: Problem occurs in the volume.
Formatting: Volume is being formatted.
Preparing Quick Format: Volume is being prepared for quick formatting.
Quick Formatting: Volume is being quick-formatted.
Correction Access: Access attribute is being corrected.
Copying: Data in the volume is being copied.
Read Only: Data cannot be written on a read-only volume.
Shredding: Volume is being shredded.
Hyphen (-): Any status other than the above.
RAID level. An asterisk "*" indicates that the parity group to which the LDEV
belongs is interleaved (concatenated). Either RAID level of the parity group
appears.
Emulation type of each parity group.
Free: Capacity of the free space of each parity group. The control information
used by the storage system, such as control cylinders, is not included in the
Free capacity.
Total: The total capacity of the LDEVs and Free capacity is displayed in the
Total.
Unallocated: Number of unallocated LDEVs in each parity group.
Total: Total number of LDEVs in each parity group.
Drive type and rpm in use on this LDEV.
Encryption information.
Enable: encrypted parity group
Disable: non-encrypted parity group
If the parity group in which the encryption setting is not defined, a hyphen (-) is
displayed.
Displays the attribute of the parity group.
Hyphen (-): The parity group in which the attribute is not defined.
Resource group name and ID of which this parity group is a member.
Model name and serial number of the virtual storage machine that has the parity
group.
Opens the Create LDEVs window.
Opens the Format LDEVs window.
Parity Groups window 213