Starting Pool Monitoring Manually; Stopping Pool Monitoring Manually - HP XP7 User Manual

8. Click Apply.
If the Go to tasks window for status check box is selected, the Tasks window appears.

Starting pool monitoring manually

Use this procedure to start pool monitoring manually.
Prerequisites
The Storage Administrator (Provisioning) role is required to perform this task.
Procedure
1. Open the Monitor Pools window.
In Command View Advanced Edition:
a. On the Resources tab, click Storage Systems, and then expand All Storage Systems.
b. Expand the target storage system, right-click THP Pools, and then select System GUI.
In Remote Web Console:
a. Click Storage Systems, and then expand the Storage Systems tree.
b. Click Pools.
2. On the Pools tab, click the row of a pool you want to start monitoring.
3. Click More Actions, and then select Monitor Pools.
4. In the Task Name text box of the Monitor Pools window, enter the task name.
You can enter up to 32 ASCII characters and symbols in all, except for \ / : , ; * ? " < > |.
"date-window name" is entered by default.
5. Click Apply to register the setting in the task.
If Go to tasks window for status is selected, the Tasks window opens.

Stopping pool monitoring manually

Use this procedure to stop pool monitoring manually.
Prerequisites
The Storage Administrator (Provisioning) role is required to perform this task.
Procedure
1. Open the Pools window.
In Command View Advanced Edition:
a. On the Resources tab, click Storage Systems, and then expand All Storage Systems.
b. Expand the target storage system, right-click THP Pools, and then select System GUI.
In Remote Web Console:
a. Click Storage Systems, and then expand the Storage Systems tree.
b. Click Pools.
2. From the Pools table, click the row of a pool you want to stop monitoring.
3. Click More Actions to select Stop Monitoring Pools.
4. In the Task Name text box of the Stop Monitoring Pools window, enter the task name.
You can enter up to 32 ASCII characters and symbols in all, except for \ / : , ; * ? " < > |.
"date-window name" is entered by default.
5. Click Apply to register the setting in the task.
If Go to tasks window for status is selected, the Tasks window opens.
158 Configuring thin provisioning