HP XP7 User Manual page 86

Notes on performing monitoring
You can collect the monitoring data even while performing the relocation.
After stopping the monitoring, the tier range is automatically calculated.
The latest available monitoring information, which is collected just before the relocation is
performed, is used for the relocation processing.
When the relocation is performed, the status of the monitor information must be valid.
Viewing monitor and tier relocation information:
If the raidcom get thp_pool command is executed with the -key opt option specified, the
monitoring information and tier relocation information are displayed. For details about the raidcom
get thp_pool command, see the HP XP7 RAID Manager Reference Guide. Items are displayed
as follows:
STS
This item displays the operational status of the performance monitor and the tier relocation.
◦
STP: The performance monitor and the tier relocation are stopped.
◦
RLC: The performance monitor is stopped. The tier relocation is operating.
86 Configuring thin provisioning