Changing Thp V-Vol Settings; Removing The Thp V-Vol To Be Registered; Formatting Ldevs In A Windows Environment - HP XP7 User Manual

Changing THP V-VOL settings

The Storage Administrator (Provisioning) role is required to perform this task.
Before registering a THP V-VOL, you may need to change the THP V-VOL settings.
1. In the Selected LDEVs table in the Create LDEVs window, select an LDEV, then click Change
LDEV Settings.
2. In the Change LDEV Settings window, you can change the setting of LDEV Name, Initial LDEV
ID, or MP Blade.
If you change LDEV Name, specify the prefix characters and the initial number for this
LDEV.
If you change Initial LDEV ID, specify the number of LDKC, CU, DEV, and Interval. To
check used LDEVs, click View LDEV IDs to confirm the used LDEVs. The View LDEV IDs
window opens.
If you change MP Blade, click the list and specify the MP blade ID. If the specific MP
blade is specified, select the MP blade ID. If any MP blade is specified, click Auto.
3. Change the settings, then click OK.
4. In the Create LDEVs window, click Finish.
5. In the Confirm window, click Apply.
The setting is changed.
If Go to tasks window for status is checked, the Tasks window opens.

Removing the THP V-VOL to be registered

The Storage Administrator (Provisioning) role is required to perform this task.
If you do not want to register the THP V-VOL, you can remove it from the registering task.
1. In the Selected LDEVs table in the Create LDEVs window, select the LDEV, then click Remove.
The message appears asking whether you want to remove the selected row or rows. Click
OK.
2. Click Finish.
3. In the Confirm window, click Apply.
The LDEV is removed.
If Go to tasks window for status is checked, the Tasks window opens.

Formatting LDEVs in a Windows environment

In a Windows environment, both Normal Format or Quick Format are commonly used. In this
environment, Quick Format consumes less thin provisioning pool capacities than Normal Format.
On Windows Server 2008, using Normal Format issues Write commands to the overall volume
(for example, overall "D" drive). When Write commands are issued, pages corresponding to the
overall volume are allocated, therefore, pool capacities corresponding to the ones of the overall
volume are consumed. In this case, the thin provisioning advantage of reducing capacities is lost.
Quick Format issues Write commands only to management information (for example, index
information). Therefore, pages corresponding to the management information areas are allocated,
but the capacities are smaller than the ones consumed by Normal Format.
136 Configuring thin provisioning