HP XP7 User Manual page 286

Item
Smart Pool
Options for Smart Pool
286 Thin Provisioning Z and Smart Tiers Z GUI reference
Description
Select the check box, then Enable or Disable when using or not using Smart Tiers
or Smart Tiers Z.
In Fast Snap, you cannot change the setting of this function.
If TSE-VOL is assigned to the selected pool, the pool cannot be changed from
Disable to Enable.
Specifies the performance monitoring, tier relocation, edit buffer space for new
page assignment, and buffer space for tier relocation if Smart Pool is set to
Enable.
In Fast Snap, you cannot change the setting of this function.
Select the Tier Management check box, and then set the tier management, the
cycle time, and the monitoring period.
Tier Management: Select Auto or Manual.
Cycle Time: When selecting Auto in the Tier Management option, select the
cycle of performance monitoring and tier relocation from the Cycle Time list.
Monitoring Period: When selecting 24 Hours in the Cycle Time list, specify
the time of starting and ending of performance monitoring in 00:00 to 23:59
(default value). Take one or more hours between the starting time and the
ending time. If you specify the starting time later than the ending time, the
performance monitoring continues until the time when you specify as the
ending time on the next day.
Select the Monitoring Mode check box, and then set the monitoring mode.
Monitoring Mode: Specify the monitoring mode. If you perform the tier relocation
weighted to the past period monitoring result, select Continuous Mode. If you
perform the tier relocation on the specified cycle, select Period Mode.