HP XP7 User Manual page 121

12. In the Warning Threshold text box, enter an integer value from 1 to 100 as the rate (%) for
the pool. The default value is 70%.
13. In the Depletion Threshold text box, enter an integer value from 1 to 100 as the rate (%) for
the pool. The default value is 80%.
Enter a value that is greater than the value of the Warning Threshold.
14. Click Add.
The created pool is added to the Selected Pools table. If invalid values are set, an error message
appears.
The Pool Type, Pool Volume Selection, and Pool Name must be set. If the required items are
not entered or selected, you cannot clickAdd.
If you select a row and click Detail, the Pool Properties window appears. If you select a row
and click Remove, the message appears asking whether you want to remove the selected row
or rows. If you want to remove the row, click OK.
15. Click Next.
The Create LDEVs window appears. Go to
If Subscription Limit of the created pool is set to 0%, the Create LDEVs window does not appear.
Click Finish and the Confirm window appears.
16. In the Confirm window, click Apply to register the setting in the task.
If you select a row and click Detail, the Pool Properties window appears.
If the Go to tasks window for status check box is selected, the Tasks window appears.
Creating Thin Provisioning Z pools by selecting pool-VOLs automatically
You can use Remote Web Console to create a Thin Provisioning Z pool with automatically selected
pool-VOLs.
Prerequisites
The Storage Administrator (Provisioning) role is required to perform this task.
Procedure
1. Open the Create Pools window.
In Command View Advanced Edition:
a. On the Resources tab, click Storage Systems, and then expand All Storage Systems.
b. From General Tasks, selectCreate Pool
In Remote Web Console:
a. Click Storage Systems, and then expand the Storage Systems tree.
b. Click Pools.
c. Click Create Pools.
2. In the Create Pool window, select Thin Provisioning from the Pool Type list.
In the Create Pools window, select Thin Provisioning from the Pool Type list.
3. From the System Type list, select Mainframe.
4. From the Smart Pool field, select Disable.
5. From the Pool Volume Selection field, select Auto.
6. Follow the steps below to select pool-VOLs.
1. From the Resource Group list, select the resource group name of the pool-VOL.
2. From the Performance list, select the performance of the pool.
"Creating Volumes" (page 128) to create LDEVs.
Working with pools 121