HP XP7 User Manual page 233

Item
LDEV Name
Full Allocation
Tiering Policy
New Page Assignment Tier
Description
Specify the LDEV name, using up to 32 characters.
Prefix: Fixed character string.
Initial Number: Initial number.
Specify the initial number according to these examples.
Example:
◦
1: Up to 9 numbers are added (1, 2, 3 ... 9)
◦
08: Up to 92 numbers are added (08, 09, 10 ... 99)
◦
23: Up to 77 numbers are added (23, 24, 25 ... 99)
◦
098: Up to 902 numbers are added (098, 099, 100 ... 999)
Select Enable to allocate all pages of LDEVs on the current pool. The default is
Disable. If LDEVs are satisfied of all following conditions, you can select Enable.
All LDEVs are V-VOLs of Thin Provisioning or Thin Provisioning Z.
The sum of the mapped capacity and the reserved capacity is same or less
than the depletion threshold.
The specified pool is not in the shrink processing of the pool capacity.
The LDEV emulation type is OPEN-V or 3390-A.
The status of LDEV is Normal.
Specify the tiering policy for the LDEV. For details about the setting. You can
specify this function only when the V-VOLs using Smart Tiers or Smart Tiers Z
are available. See"Notes on tiering policy settings" (page 98)
Specify the new page assignment tier you want to assign to the LDEV. Middle
is set by default. You can select from High, Middle, or Low. See
assignment tier" (page 100).
"New page
Edit LDEVs wizard 233