Emerson EV1000-2S0004G User Manual page 124

艾默生变频器、艾默生CT高级授权代理商--广州盟雄 020-85543394 qq:2294731312
120 Appendix 1 Parameter Set
Para. Name
Displayed Parameter at
F8.03
Stop state
Group 8: Display Control Parameters
Binary code implication:
0: not displayed
1: displayed
One's place
BIT0: reference frequency ( Hz)
BIT1: external counter value (no unit)
BIT2: rotating speed (r/min)
BIT3: preset rotating speed ( r/min)
Ten's place:
BIT0: actual line speed ( m/s)
BIT1: preset line speed ( m/s)
BIT2: VCI ( V)
BIT3: CCI ( V)
Hundred's place of LED:
BIT0: Analog close-loop feedback ( ％ )
BIT1: Analog close-loop setup ( ％ )
BIT2: actual length
BIT3: preset length
Thousand's place:
BIT0: terminal state (no unit)
BIT1: bus voltage
BIT2: accumulated length
Note: if the setting is 0, the default display is
operating freq. before compensation.
EV1000 Series General Purpose Variable Speed Drive User Manual
Range Unit Default Modification
1 1FF ○