Vga Driver Utility - Intel PSB-701LF User Manual

3-2. VGA DRIVER UTILITY

The VGA interface embedded with our PSB-701LF can support a wide
range of display. You can display CRT, PCI-E (SDVO) simultaneously
with the same mode.
3-2-1. Installation of VGA Driver:
To install the VGA Driver, simply follow the following steps:
1. Place insert the Utility Disk into Floppy Disk Drive A/B or CD
ROM drive.
2. Under Windows 2000/XP/Vista system, go to the directory where
VGA driver is located.
3. Click Setup.exe file for VGA driver installation.
4. Follow the instructions on the screen to complete the installation.
5. Once installation is completed, shut down the system and restart in
order for the changes to take effect.
PSB-701LF USER
'
S MANUAL
Chapter 3 Software Configuration
Page:3-3