Chapter 2 Hardware Configuration
2-16. CLEAR CMOS DATA SELECTION
JP3 : Clear CMOS Data Selection
The selections are as follows :
FUNCTION
Normal
Clear CMOS
*** Manufacturing Default -- Normal.
Note: To clear CMOS data, user must power-off the computer and set the jumper
to "Clear CMOS" as illustrated above. After five to six seconds, set the
jumper back to "Normal" and power-on the computer.
2-17. CPU FAN CONNECTOR
CPU_FAN1 : CPU Fan connector
The pin assignment is as follows:
PIN
1
2
3
4
Page: 2-12
JUMPER SETTING
(pin closed)
ASSIGNMENT
GND
VCC12
LPC1_FANIO1
LPC1_FANPWM1
ILLUSTRATION
1-2
2-3
PSB-701LF USER
JUMPER
'
S MANUAL