Siemens SIMOVERT MASTERDRIVES Operating Instructions Manual page 69

03.99
r732.10
r732.11
r732.12
r732.13
P712 Bit 2: 0
r732.14
r732.15
r732.16
r732.17
r732.18
r732.19
r732.20
r732.21
r732.22
r732.23
r732.24
r732.25
P712 Bit 2: 1
r732.14
r732.15
r732.16
r732.17
r732.18
r732.19
r732.20
r732.21
r732.22
r732.23
r732.24
r732.25
r732.26
r732.27
r732.28
r732.29
Siemens AG 6SE7087-6NX84-0GB0
SIMOVERT MASTERDRIVES
Counter Initial Data Setting
Counter for detected Initial Data Setting ; reset sequences for CC-
Link interface of CBL initiated by PLC.
Counter Frequency Set Command
Counter for detected Frequency Set Command ; command
sequences to send new reference values to the converter.
Counter Command Request
Counter for detected Command Request ; command sequences to
parameterize the converter. The command request uses the PKW
request interface.
Counter PKW Request
Counter for PKW requests; every count is a PKW request through the
DPRAM interface of CBL.
Diagnostic page selection: CC-Link data
Data from PLC (CC-Link)
M->RYn+00...0F
M->RYn+10...1F
M->R_RWwm+0 (monitor code)
M->R_RWwm+1 (frequency set command)
M->R_RWwm+2 (command code)
M->R_RWwm+3 (written data)
Data to PLC (CC-Link)
R->MXn+00...0F
R->MXn+10...1F
R->M_RWrm+0 (monitor value)
R->M_RWrm+1 (actual frequency)
R->M_RWrm+2 (command reply)
R->M_RWrm+3 (read data)
Diagnostic page selection: PKW request/reply data
PKW request from CBL to CU
PKE
IND
PWE1
PWE2
Reserved
Reserved
PKW reply from CU to CBL
PKE
IND
PWE1
PWE2
Length of PKW reply (length in 16 bit words)
Reserved
Software version
example: contents 0021 => version 2.1
Software identifier
Software date
Software date, day (high byte) and month (low byte) shown in hexadecimal form
Software date
Software date, year (shown in hexadecimal form)
Operating Instructions
Diagnosis and troubleshooting
6-11