Siemens SIMOVERT MASTERDRIVES Operating Instructions Manual page 13

03.99
WARNING
Siemens AG 6SE7087-6NX84-0GB0
SIMOVERT MASTERDRIVES
Because of the DC link capacitors, there continues to be dangerous
voltage in the unit until up to 5 minutes after disconnection. Therefore
the unit must not opened until at least this time has expired.
Due to the technical structure of the LBA, certain sequences are
stipulated for use of the slots.
If only one adapter board with optional boards is inserted into the
electronics box, it always must be plugged into mounting position 2.
If a T100 / T300 or T400 technology board is plugged into the
electronics box in addition to the adapter board with CBL, the
technology board must be plugged into mounting position 2. In this
case, the CBL is plugged into mounting position 3.
Operating Instructions
Description
2-5