Download  Print this page

Cbl, Converter Between Cc-link And Masterdrives - Siemens SIMOVERT MASTERDRIVES Operating Instructions Manual

Cbl-communication board cc-link.
Hide thumbs

Advertisement

Communication via CC-Link
4.2

CBL, converter between CC-Link and MASTERDRIVES

4-4
CBL converts the CC-Link profile for inverter to the data structure of
SIMOVERT MASTERDRIVES.
It converts the control bits (remote IO bits RYn....) to the bits of the
control word from the converter. In other direction the bits of the status
word are translated to the remote IO bits RXn... . Chapter "Appendix"
describes the rules of bit generation.
The CBL also transports the reference values (setpoint) and the actual
values (incl. monitoring) between CC-Link interface and the dual port
RAM interface of the MASTERDRIVES. CBL translates between the
different data formats by calculating with scaling factors.
The handling of parameters at CC-Link by Command code execution
is transformed to the PKW task handling with PKW request and reply of
MASTERDRIVES.
PLC +
CC-Link
CC-Link
profile for inverter
remote IO bits
remote register
Fig. 4-1
CBL converting between CC-Link and MASTERDRIVES
CBL
conversion of
control and status bits
reference value
(setpoint)
actual values
(incl. monitoring
command code
execution
6SE7087-6NX84-0GB0
Operating Instructions
SIMOVERT MASTERDRIVES
03.99
MASTER-
DRIVES
DPRAM
PZD
Channel
PKW
Channel
Siemens AG

Advertisement

   Related Manuals for Siemens SIMOVERT MASTERDRIVES

Comments to this Manuals

Symbols: 0
Latest comments: