Siemens SIMOVERT MASTERDRIVES Operating Instructions Manual page 55

03.99
Process data
softwiring of receive
channel
NOTE
Siemens AG 6SE7087-6NX84-0GB0
SIMOVERT MASTERDRIVES
Parameter
Controlword 1
connecting CBL controlword 1 (REF VALUE: PZD1) to converter controlword 1
P554
1)
P555
P565
P568
P569
P571
P572
1) use alternativly P555, P556 or P557 (AND function)
2) check P448 and P449 for JOG speed!
After power-up till data transmission between PLC cpu and CBL the
alarm message A035 will occur and will be displayed (control bits 11
and 12 equals 0!). The duration depends on the converter type and the
configuration (tech board plugged?) and takes some seconds. After
starting data transmission via CC-Link to PLC cpu the alarm will be
automatically cleared.
Parameter
Controlword 2
connecting CBL controlword 2 (REF VALUE: PZD4) to converter controlword 2
P576
P577
P580
P581
P???
P???
P???
Operating Instructions
Contents Meaning
3100 Mandatory: RUN/STOP
3101 Mandatory: MRS function
3107 Mandatory: reset error flag
3108 Mandatory: JOG mode
3109 Mandatory: JOG mode
3111 Mandatory: STF (Forward)
3112 Mandatory: STR (Reverse)
Contents Meaning
3400 Mandatory: RT function
3401 Mandatory: RT function
3404 Mandatory: RL, RM, RH
3405 Mandatory: RL, RM, RH
3411 Optional: Optionflag F27
3412 Optional: Optionflag F28
3413 Optional: Optionflag F29
Start-up of the CBL
2)
2)
5-7