Siemens SIMOVERT MASTERDRIVES Operating Instructions Manual page 35

03.99
Example
Parameter index
(IND) 2nd word
Example
Parameter index
Parameter value
(PWE) 3rd and 4th
word
Siemens AG 6SE7087-6NX84-0GB0
SIMOVERT MASTERDRIVES
The parameter 'PKW number' for the G-SST1 (number of net data in
the PKW channel):
Minimum value:
Maximum value:
Permissible values for USS:
If a change task with a PWE other than 0, 3, 4 or 127 is sent to the
converter, the reply is: 'Task cannot be executed' with error value 104.
The index is an 8-bit value and is placed in bits 0 to 7. The bits 8 to 15
have additional features. Refer to instruction manual of the converter.
In the case of an indexed parameter, the required index is transferred.
The meaning of the indices can be found in the section, "Parameter
list", of the instruction manual for the converter.
In the case of a descriptive element, the number of the required
element is transferred. The meaning of the descriptive elements can be
found in the "PROFIBUS profile for variable-speed drives" (VDI/VDE
3689).
Source for the ON/OFF1 command (control word 1, bit 0):
P554 (=22A Hex)
Change parameter value of index 1.
2nd word
Bit No.: 15
Binary value 0 0
HEX value 0
Bits 8 to 15: In this case value = 0
Bits 0 to 7: Index or number of the descriptive element
The parameter value (PWE) is always transferred as a double word (32
bits). Only one parameter value at a time can be transferred in one
telegram.
A 32-bit parameter value is composed of PWE1 (least significant word,
3rd word) and PWE2 (most significant word, 4th word).
A 16 bit parameter value is transferred in PWE1 (least significant word,
3rd word). In this case, you must set PWE2 (most significant word, 4th
word) to the value 0.
Operating Instructions
0 (0 words)
127 (corresponds to variable length)
0, 3, 4 and 127
Parameter index (IND)
8 7
Byte 3
0 0 0 0 0 0
0
Communication via CC-Link
Byte 2
0 0 0 0 0 0 0 1
0 1
4-15
0