Table of Contents
Advertisement
VIA!4.0-EM/VIA!7.0-EM/VIA!10.0-EM
E L A N H O M E S Y S T E M S
Installation
ELAN Precision Panels and Wall Plates
VIA! Touch Panels require an ELAN Precision Panel or Wall Plate to function
properly. The specific application will determine the Precision Panel or Wall
Plate needed. Each of these panels provides a power supply of the correct
voltage (+16VDC) and amperage for the application being covered. In addi-
tion to power, these Precision Panels and Wall Plates have provisions for
critical connections like IR, GND, and System Status.
PVIA1
The PVIA1 is a single-gang
®
Decora
style wall plate designed to
support a single VIA! Touch Panel.
It has connections for Power, GND,
Sense/Status, IR, Video, and Serial
Control. It can be used in any applica-
tion including ELAN Multi-Room sys-
tems, or Stand-Alone systems.
PVIA4
The PVIA4 is a dual-gang wall plate
that provides power, control, and video
connectivity for up to four VIA! Touch
Panels. It can be used in any applica-
tion including ELAN Multi-Room sys-
tems, or Stand-Alone systems.
PVIA10
The PVIA10 is a Precision Panel
designed to provide power, control,
and video connectivity for up to ten
VIA! Touch Panels. It can be used in
any application including ELAN Multi-
Room systems, or Stand-Alone.
Page 18
© ELAN Home Systems 2007 • All rights reserved.
Hide quick links:
Advertisement
Table of Contents
