Appendix B: Programming - Elan VIA!4.0-EM Installation Manual

VIA!4.0-EM/VIA!7.0-EM/VIA!10.0-EM

Appendix B: Programming

All VIA! Touch Panels must be programmed with ELAN VIA!
Software using a PC running Windows 98 or higher. VIA!TOOLS utilizes the
VIA!Learner to interface between the PC and the touch panel to be pro-
grammed. It is NOT NECESSARY to power the VIA! during programming,
making it possible to program and download to multiple units prior to
installation.
VIA! Learner
COM PORT
DB-9
Serial
Cable
Please see the VIA!TOOLS Help file for complete step-by-step information
on programming VIA! Touch Panels.
Page 40
VIA!
DOWNLOAD
PORT
Figure 4.1: VIA!TOOLS Programming
© ELAN Home Systems 2007 • All rights reserved.
E L A N H O M E S Y S T E M S
Download
Cable
TEST IR
PC
®
TOOLS Setup
Programming
Connector
POWER
16VDC