Table of Contents
Advertisement
QUICK INSTALL GUIDE
PLANNING THE INSTALLATION
The ITP-12 is designed to wall mount in either Portrait or Landscape
orientation. Ensure there is adequate wall space for the ITP-12 and that
the surface is relatively smooth.
The ITP-12 requires a minimum mounting depth of 1¾" (4.5 cm) from the
front surface plus room for wire. Ensure that adequate depth is available.
Power may be supplied by Power Over Ethernet (PoE) or by a 12V DC
power supply (not included). PoE must meet the IEEE 802.3af standard.
Direct power via a 12V DC external power supply requires a minimum
current output of 1A.
The ITP-12 connects to the local network via Ethernet or Wi-Fi.
When using Wi-Fi you must ensure that there is adequate Wi-Fi
coverage at the mounting location.
1
Installing the ITP-12
a. Mounting Height
Depending on how tall
your homeowner is, it is
recommended to locate the
center of the panel between
57"- 65" (145 cm -165 cm)
above the finished floor.
6
165 cm / 65"
145 cm / 57"
Advertisement
Table of Contents
