Elan S8 Multi-Room A/V Controller - Elan VIA!4.0-EM Installation Manual

VIA!4.0-EM/VIA!7.0-EM/VIA!10.0-EM

ELAN S8 Multi-Room A/V Controller

ELAN's SPP (System Precision Panel) is designed to work with any S Series
Multi-Room controller. Figure 2.7 shows ten VIA! Touch Panels connected
to a System8 (S8.6AV or S8.6P) Multi-Room A/V Controller using an SPP. No
PVIA Wall Plate is necessary when using VIA!s with an S8; the SPP has all
necessary provisions. A PWR4 or PWR10 Power Supply must be used when
connecting VIA! Touch Panels to the SPP.
Note: The SPP can be used with ANY ELAN S Series Multi-Room
Controller. Connections are identical for ELAN S6, S8 or S12 appli-
cations.
Page 8
SPP
PWR10
16VDC
10.0A
-
+
S8.6/S6
Figure 2.7: S6/S8.6/S12/SPP Application
© ELAN Home Systems 2007 • All rights reserved.
E L A N H O M E S Y S T E M S
VIA!NET EXT IR TO SENSE INPUTS SS/SC4
1 2 3
USE STEREO 3.5mm PLUGS ONLY
4 5 6
ZONE ZONE
1 5
TRIGGERS
1 2 3 4
ZONE ZONE
2 6
5 6 7 8
POWER
ZONE ZONE
3 7
+ - -
ZONE ZONE
16VDC / 10A
4 8
16VDC / 4A
16VDC/1.5A