Page 3
Wireless 8.4” Color LCD Touch Panel front & rear panel controls and indicators, using the desktop cradle and turning the touch panel ON or OFF. Also provides motif style and button layout for the ELAN user interface. Chapter 2 Provides step-by-step instructions for setting the the VIA!2-8.4 Wireless 8.4”...
Page 6
• Do not apply excessive pressure to the display screen. • ELAN strongly recommends that you do not touch the display screen directly with your fingers. Oil from your fingertips may be difficult to remove. Please use the stylus provided.
802.11b/g WiFi wireless networks. It is incorporated into your home theater solution using a router, a wireless access point (WAP) and an ELAN VIA!2-SS1 Sys- tem Station. As of this writing, an ELAN VIA!-SC4 System Controller would be required for 2-way RS-232 feedback and control.
USER’S GUIDE VIA!2-8.4 Accessories See your ELAN authorized dealer to purchase accessories for your VIA!2- 8.4 Wireless Touch Panel. The accessories below are currently being offered by ELAN Home Systems: Table 1-2 Accessories Item Picture Description 12 VDC Power Adapter with Cord...
Each source can be custom programmed to work just the way the user desires. ELAN recommends using the provided stylus to operate the touch screen. Avoid touching with your fingers, as oil from your fingertips can be difficult to remove. The stylus for the VIA!2's touch screen is located in the upper right corner of the panel.
Do not spray directly on the panel screen. Use of strong chemicals and/or some cleaning agents may discolor the polyester film that makes up the touch screen. If further cleaning is necessary, ELAN recommends using a diluted detergent solution or mild cleaner such as, Windex Glass Cleaner, ®...
Tapping the Yes button brings up the calibration screen, Figure 2-5 . Tappingg the No option returns you to the System Setup page. ELAN recommends that the installer calibrate the touch panel prior to first use. NOTE: You can re-calibrate at anytime using VIA!2-8.4 System Setup Page.
Password Entry screen. When the password is entered correctly the Sys- tem Setup page displays additional installer-specific settings. These set- tings are used by the installer to initially set up your system. ELAN recommends that only trained and authorized personnel change any parameters in the Installer System Setup page.
Wireless Touch Panel, translating the wireless panel's 8.02.11b/g WiFi commands into actions that can control just about every aspect of a Home Theater or a zone in an ELAN multi-room system. Future software / feature-set enhancements to the VIA!2-SS1 Wireless Touch Panel are all field-upgradeable through VIA!TOOLS setup software.
ELAN in writing, ELAN shall repair or replace the item at the company's option. This warranty shall not apply (a) to equipment not manufactured by ELAN, (b) to...