Connections; Stand-Alone/Home Theater - Elan VIA!4.0-EM Installation Manual

E L A N H O M E S Y S T E M S

Connections

Stand-Alone/Home Theater

VIA! Touch Panels are ideal for use as Stand-Alone system controllers or
Home Theater controllers. For control of a Home Theater system, the VIA!
and PVIA Wall Plate are combined with a method for IR distribution such as
ELAN's IRD4 Amplified Connection Block. Signals originate at the VIA!4.0-
EM, pass through the PVIA Wall Plate, then travel to the connection block
where they are routed to each component.
Note: This application does not allow for indepedent control of iden-
tical sources. An ELAN Multi-Room Controller, SS1 System Station
or SR-1 Sense/Relay Module should be used.
Amplified IR
Connection Block
Sources
Figure 3.17: Stand-Alone/Home Theater Connections
© ELAN Home Systems 2007 • All rights reserved.
VIA!4.0-EM/VIA!7.0-EM/VIA!10.0-EM
White/Brown
Brown
White/Green
Green
White/Orange
Orange
ELAN
White/Blue
C45P
Standard ELAN RJ-45 Pin-Out
PVIA1 Rear
+16V
GND
+16V
GND
N/C
V485+
N/C
V485-
IR
N/C
Blue
ST/SNS
Z485+
Z485-
Use BOTH Twisted
Pairs For Power
(GR,GR/WH & BR, BR/WH)
PIN # COLOR CODE
1 BLUE
2 WHITE/BLUE
3 ORANGE
4 WHITE/ORANGE
TAB
5 GREEN
6 WHITE/GREEN
7 BROWN
8 WHITE/BROWN
CABLE
Page 29