Department Group Text; Plu Group Text - Sharp UP-3500 Instruction Manual

I I I I I Department group text
You can program a maximum of 12 characters for each department group (1 to 9).
(1) Select the PGM2 mode and touch the [SETTING] to perform the programming.
(2) Touch the [TEXT] button to display the menu, and touch the [DEPT. GROUP] button to display the
group list.
(3) Touch or select the group and touch the [ENTER] key to program characters.
(4) Enter characters and touch the [OK] key.
(5) To terminate the programming, touch the [EXIT] key.
Text
TEXT
I I I I I PLU group text
You can program a maximum of 12 characters for each PLU group (0 to 99).
(1) Select the PGM2 mode and touch the [SETTING] to perform the programming.
(2) Touch the [TEXT] button to display the menu, and touch the [PLU GROUP] button to display the group
list.
(3) Touch or select the group and touch the [ENTER] key to program characters.
(4) Enter characters and touch the [OK] key.
(5) To terminate the programming, touch the [EXIT] key.
Text
TEXT
242
(TEXT ➝ DEPT. GROUP ....... PGM2)
G
max. 12 characters ( ROUP1 through
(TEXT ➝ PLU GROUP ....... PGM2)
max. 12 characters (PLU GR00 through PLU GR99)
Parameter
G
ROUP9)
Parameter