Department Group Revenue Center; Plu/Upc - Sharp UP-3500 Instruction Manual

I I I I I Department group revenue center
Department group no.: 1 to 99
(1) Select the PGM2 mode in the mode selection window, and touch the [2 POS SETTING] to perform the
programming.
(2) Touch the [1 DEPARTMENT] button to display the detail menu.
(3) Touch the [2 DEPT GR. REVENUE] button to program the each department group.
(4) Enter or select the group number.
(5) Touch the required programming item, and enter or select each parameter and touch the [ENTER] key.
Repeat this step (5) satisfactorily.
(6) To terminate the programming, touch the [EXIT] key.
Text
TEXT
REVENUE NO.
I I I I I PLU/UPC
(2 SALES ITEMS
(2 ITEM SETUP
PLU code: max. 6 digits (1 to 999999)
UPC/EAN code: max. 13 digits (EAN13, EAN8, UPC-A)
(1) Select the PGM1 or PGM2 mode and touch the [2 POS SETTING] to perform the programming.
(2) In the PGM1 mode, touch the [1 SALES ITEMS] button to display the menu, and touch the [1 PLU/
UPC] button to display the each PLU/UPC.
(2)' In the PGM2 mode, touch the [2 ITEM SETUP] button to display the menu, and touch the [1 PLU/UPC]
button to display the detail menu. Then touch the [1 INDIVIDUAL PLU/UPC] button to display the each

PLU/UPC.

(3) Touch the direct PLU key, or enter the PLU/UPC number and touch the [ENTER] key in the PLU list
window by touching the [LIST MENU] key to program the each PLU/UPC.
(4) Touch the required programming item, and enter or select each parameter and touch the [ENTER] key.
Repeat this step (4) satisfactorily. For the programming items, refer to the following tables (same as
Dynamic UPC).
(5) To terminate the programming, touch the [EXIT] key.
The data table for PLU is same as dynamic UPC.
158
16 characters (DPT GR-n)
1 digit (1 to 9)
➝
1 PLU/UPC ....... PGM1)
➝
1 PLU/UPC
➝
(1 DEPARTMENT 2 DEPT GR. REVENUE ....... PGM2)
Parameter
➝
1 INDIVIDUAL PLU/UPC ....... PGM2)