Supervisor Clerk - Sharp UP-3500 Instruction Manual

Supervisor Clerk

This function is used to substitute a supervisor clerk for an ordinary clerk. The supervisor clerk can make
entry as an ordinary clerk by assigning the ordinary clerk code. You can use the supervisor clerk function
only for substituting for an ordinary clerk. This function is available only in the real clerk key system.
To use this function, insert a real clerk key assigned supervisor clerk, enter the ordinary clerk code and
touch the [CLK#] key. When you insert a supervisor clerk key and open an existing guest check, the
original clerk who usually controls the guest check will automatically be assigned.
• This function is unavailable when the "overlapped clerk function" is enabled.
• When the supervisor clerk and the original clerk are entered, the operation in OPXZ, X1/Z1, X2/Z2,
PGM1, or PGM2 mode is inhibited.
Inserting a supervisor clerk key
• When opening a new guest check (GLU code 1010) with this function:
(Inserting a supervisor clerk key: Clerk#12)
If it is programmed to display the clerk popup window ("CLERK POPUP" in FUNC.SELECT2 menu), you
can start the operation from a GLU code entry. After you touch the [GLU] key, the popup window will open
for a clerk# entry.
• When receiving payment for the order stored in the GLU code 1010:
(Inserting a supervisor clerk key: Clerk#12)
To open an existing guest check
Clerk code
When working outside guest check
or opening a new guest check
Key Operation
1010 [GLU]
[PLU 00002 ]
Key Operation
1010 [GLU]
[CLK#]
1 [CLK#]
[NBAL]
[NBAL]
Display
Display
125