Drink Dispenser Programming - Sharp UP-3500 Instruction Manual

Drink Dispenser Programming

This function is used to program the drink dispenser data.
I I I I I Drink dispenser preset
(1) Select the PGM2 mode and touch the [DD SETTING] button to display the job menu.
(2) Touch the [DD PRESET] button to program details.
(3) Touch the required programming item, and enter or select each parameter and touch the [ENTER] key.
Repeat this step (3) satisfactorily.
(4) To terminate the programming, touch the [EXIT] key.
Text
VALUE NUMBER
CONNECTION
BAUD RATE
CREDIT MODE
DEBIT MODE
LENGTH CLK CODE
PARITY CHECK
CREDIT TO CLK
I I I I I Drink dispenser operator
(1) Select the PGM2 mode and touch the [DD SETTING] button to display the job menu.
(2) Touch the [DD OPERATOR] button to display the clerk code list, and select or enter the clerk code (1 -
9999) and touch the [ENTER] key to program details.
(3) Touch the required programming item, and enter or select each parameter and touch the [ENTER] key.
Repeat this step (3) satisfactorily.
(4) To terminate the programming, touch the [EXIT] key.
Text
GLU START CODE
END CODE
294
(DD PRESET ....... PGM2)
First 2 digits value of PLU code: 00 to 99/00
Connection: ON-LINE/OFF-LINE
Transmission data rate (Baud rate)
38400 bps:
19200 bps:
9600 bps:
4800 bps:
2400 bps:
1200 bps:
600 bps:
300 bps:
ENABLE/DISABLE
ENABLE/DISABLE
2/3
YES/NO
YES/NO
(DD OPERATOR ....... PGM2)
GLU start code: 000 - 999/000
GLU end code: 000 - 999/000
Parameter
Parameter