On-Line; Pole Display - Sharp UP-3500 Instruction Manual

I I I I I On-line
(DEVICE CONFIG ➝ ONLINE ....... PGM2)
(1) Select the PGM2 mode and touch the [SETTING] to perform the programming.
(2) Touch the [DEVICE CONFIG] button to display the menu, and touch the [ONLINE] button to program
details.
(3) Select the required programming item, and enter or select each parameter, then touch the [ENTER]
key.
Repeat this step (3) satisfactorily.
(4) To terminate the programming, touch the [EXIT] key.
Text
CHANNEL#
I I I I I Pole display
(1) Select the PGM2 mode and touch the [SETTING] to perform the programming.
(2) Touch the [DEVICE CONFIG] button to display the menu, and touch the [POLE DISPLAY] button to
program details.
(3) Select the required programming item, and enter or select each parameter, then touch the [ENTER]
key.
Repeat this step (3) satisfactorily.
(4) To terminate the programming, touch the [EXIT] key.
Text
WAITING TIME
0 - 5: "0"means no RS-232 channel is assigned.
(DEVICE CONFIG ➝ POLE DISPLAY ....... PGM2)
Waiting time until the message is displayed on the pole display (0 to 999seconds)
When you program as "0", no message is displayed.
Parameter
Parameter
283