Folder Creating; Data Saving - Sharp UP-3500 Instruction Manual

I I I I I Folder creating
The master folder can be created for the data file.
(¥SHARP¥ECRXXX05¥nnnnnnnn¥ : nnnnnnnn/folder code)
(1) Select the [FOLDER CONTROL] menu in the "SD CARD" mode, the folder code list window is
displayed.
(2) Touch the [NEW] key, the text entry window is displayed and enter the folder code (max. 8 digits) to
create.
To create the file folder, touch the [OK] key.
To cancel the operation, touch the [CANCEL] key.
I I I I I Data saving
The sales data, EJ data or programming data can be saved to the SD card.
(1) Select the [SAVING] menu in the "SD CARD" mode, the selection window "SAVE ONLY or SAVE &
CLEAR" is displayed.
1. SAVE ONLY:
2. SAVE & CLEAR: For data saving with memory clear
Select the operation "SAVE ONLY or SAVE & CLEAR", the following data list window is displayed.
Text
SALES DATA
EJ DATA
T-LOG DATA
INDIVIDUAL PROGRAMMING
DATA
ALL PROGRAMMING DATA
CUSTOMER NAME LIST
(2) Select the data menu from the list, the confirmation window is displayed.
To save the required data file, touch the [OK] key.
To cancel the operation, touch the [CANCEL] key.
For only data saving
Sales data: "DAILY" or "TERM"
Electronic journal data
T-LOG data file
Select the individual programming data:
DEPARTMENT, PLU/EAN, DYNAMIC EAN, PLU MENU KEY, LINK PLU TABLE,
CONDIMENT TABLE, PLU CONVERT, CRATE TABLE, PROMOTION TABLE,
COMBO MEAL, EAN NON-PLU, PRESS CODE, PLU INFORMATION,
TRANSACTION, TRAINING TEXT/CLK, CLERK, CASHIER, MANAGER, OTHER
PRESET, DIRECT KEY, FUNCTION MENU, FUNCTION KEY, MESSAGE,
DEVICE CONFIG, TAX, CUSTOMER, VMP ID, DD, ORDERMAN
All programming data
Customer name list
Data list
327