Data Loading - Sharp UP-3500 Instruction Manual

I I I I I Data loading
The programming data can be loaded from the SD card.
(1) Select the [LOADING] menu in the "SD CARD" mode, the selection window "CLEAR & LOAD or LOAD
ONLY" is displayed.
1. CLEAR & LOAD: For data loading with memory clear
2. LOAD ONLY:
Select the operation "CLEAR & LOAD or LOAD ONLY", the following data list window is displayed.
Text
INDIVIDUAL PROGRAMMING
DATA
ALL PROGRAMMING DATA
CUSTOMER NAME LIST
(2) Select the data menu from the list, the confirmation window is displayed.
To load the programming data file, touch the [OK] key.
To cancel the operation, touch the [CANCEL] key.
328
For only data loading
Select the individual programming data:
DEPARTMENT, PLU/EAN, DYNAMIC EAN, PLU MENU KEY, LINK PLU TABLE,
CONDIMENT TABLE, PLU CONVERT, CRATE TABLE, PROMOTION TABLE,
COMBO MEAL, EAN NON-PLU, PRESS CODE, PLU INFORMATION,
TRANSACTION, TRAINING TEXT/CLK, CLERK, CASHIER, MANAGER, OTHER
PRESET, DIRECT KEY, FUNCTION MENU, FUNCTION KEY, MESSAGE,
DEVICE CONFIG, TAX, CUSTOMER, VMP ID, DD, ORDERMAN
All programming data
Customer name list
Data list