Scale Table; Plu/Ean Stock - Sharp UP-3500 Instruction Manual

I I I I I Scale table
( ARTICLE ➝ SCALE TABLE ....... PGM2)
Scale table no.: 1 digit (1 to 9)
(1) Select the PGM2 mode and touch the [SETTING] to perform the programming.
(2) Touch the [ARTICLE] button to display the menu, and touch the [SCALE TABLE] button to display the
scale table list.
(3) Touch the scale table number button to program the tare weight.
(4) Enter the tare weight and touch the [ENTER] key.
(5) To terminate the programming, touch the [EXIT] key.
Text
WEIGHT
When the "DEL" key is touched on table number selection menu, the table is deleted.
I I I I I PLU/EAN stock
PLU/EAN stock: max. 7 digits
(1) Select the PGM1 or PGM2 mode and touch the [SETTING] to perform the programming.
(2) Touch the [ARTICLE] button to display the menu, and touch the [PLU/EAN STOCK] button to display
the operation menu (over-write, addition, or subtraction). To create the new stock, select the over-write
operation.
(3) Touch the [OVER WRITE], [ADD], or [SUB] button to program details.
(4) Touch or enter the PLU/EAN code and touch the [ENTER] key to program the stock.
(5) Enter the stock data to over-write/addition/subtraction and touch the [ENTER] key.
(6) To terminate the programming, touch the [EXIT] key.
OVER WRITE
Text
CURRENT STOCK
NEW STOCK
ADD
Text
CURRENT STOCK
ADD
SUBTRACT
Text
CURRENT STOCK
SUB
Tare weight : max. 4 digits (0 to 9.999) kg (or 0 to 99.99 lbs)
(ARTICLE ➝ PLU/EAN STOCK ....... PGM2 or PGM1)
Current stock (display only)
max. 7 digits
Current stock (display only)
max. 7 digits
Current stock (display only)
max. 7 digits
Parameter
Parameter
Parameter
Parameter
221