Vat Shift Entries - Sharp UP-3500 Instruction Manual

(When the manual VAT1 through
VAT6 system is selected.)
I I I I I VAT shift entries
This feature is intended to shift the tax status of a particular item to another tax status.
"VAT item shift" and "VAT transaction shift" are available to shift a tax status.
• • • • • VAT item shift
The tax status of one item only is shifted. You can use the [VATSFT_ITEM] key.
• • • • • VAT transaction shift
Tax status of all sales items are shifted. By touching the [VATSFT_TRANS.] key during a transaction.
• • • • • Automatic VAT shift operation
VAT shift operation may be activated automatically under the following situations:
• Automatic VAT shift by clerk
The VAT shift is performed automatically by programmed VAT shift status for each clerk.
• Automatic VAT shift by terminal
The VAT shift is performed automatically by programmed VAT shift status for each terminal.
• • • • • Manual VAT shift operation
For the manual VAT shift operation, take the following procedures:
For the VAT item shift, touch the [VATSFT_ITEM] key to activate the VAT shift prior to entering of PLU/
EAN concerned.
For the VAT transaction shift, touch the [VATSFT_TRANS.] key at the end of a transaction.
In case of "VAT shift by transaction"
(When the automatic VAT1 through
VAT6 system is selected.)
• If you want to achieve the VAT shift at the end of transaction, contact your authorized SHARP dealer.
• To program the initial status of the POS terminal to be in the VAT shift mode (Initial VAT SHIFT), please
contact your authorized SHARP dealer.
Key Operation
[PLU 00008 ]
[SUBTOTAL]
[CASH_TOTAL]
Key Operation
[VATSFT_TRANS.]
[PLU 00008 ]
[CASH_TOTAL]
[VAT]
Print
Print
67