Sharp UP-3500 Instruction Manual page 119

5) Enter or select the clerk code in the following window. If the clerk is not assigned, enter "0" as a code.
6) If the working time shift window is displayed, select the working time shift from the list.
7) If the drawer selection window is displayed, select the drawer (or none).
• • • • • Time-out
1) Touch the [TIME_OUT] key. The following window is displayed to enter the employee code.
2) Enter the employee code (max. 10 digits) and touch the [ENTER] key (or read the employee card).
3) If the secret code is requested, enter the secret code and touch the [ENTER] key in the following
window.
117