Scope; Contents - Veripos LD6 Installation Manual

Document title: LD6 Installation Manual
Document No. AB-V-MA-00520
The LD6 has a 3.5" (9 cm) colour VGA touchscreen that allows quick and easy user
setup.
In addition to calculating position, the LD6 can output all received data in standard
formats such as RTCM and NMEA.
The LD6 is exceptionally flexible. For most variants overall operating status can be
determined using the front panel display.
1.3
The purpose of this manual is to provide the necessary information to perform the
installation of the VERIPOS LD6 Integrated mobile unit. It covers installation of:




1.3.1
This manual provides guidance for engineers to install a VERIPOS LD6 receiver on a
vessel.
Details are provided to assist in locating and connecting equipment ready to be
commissioned. The manual covers installation of LD6 receiver variants.
Read this manual in conjunction with the specific 'Scope of Supply' or Equipment
Packing List' for your particular installation.
1. Introduction
2. System description
3. Installation
4. Reference information This chapter comprises additional information such as
5.
Rev No: L10
Date: 03.04.2017

SCOPE

Antennas
Coaxial and data cables
LD6 receiver and power requirement
Housings and ancillary equipment provided with the LD6.

Contents

Chapter
Contact information
Contents
This chapter specifies the purpose and target group for
the manual. It also contains a list of used abbreviations
and a specification of the document conventions.
This chapter describes the interface in detail on the front
and back side of the LD6 unit.
This chapter covers the installation of the LD6 unit as
well as cabling guidelines.
Technical Specifications, cable specifications, connector
termination and connector pin assignments.
This chapter contains contact information details about
the VERIPOS Helpdesk and VERIPOS offices
worldwide
.
Page 6
LD6 Installation Manual