Antennas - Veripos LD6 Installation Manual

Document title: LD6 Installation Manual
Document No. AB-V-MA-00520
4.1.4.2
LAN ports:
Data transfer type:
Interface type:
Typically the LAN output(s) are used in conjunction with Verify QC, Orion DP or
Quantum software running on a PC.
4.1.4.3
Three external USB ports on rear panel and three external USB ports on front panel with
Microsoft Windows class drivers supporting the following types of USB device:





4.1.4.4
One external rear-mounted VGA/SVGA/XVGA/SXVGA video port.
4.1.4.5
LD6 can operate from 110/240 VAC and / or 12/24 VDC supply. The LD6 can run on an
AC or DC supply or both. If both are used this provides redundancy in case one supply
fails.
4.1.5
For details on the types of antennas for your installation, please refer to the 'Equipment
Packing List' documentation.
Further details and instructions on antenna installation are provided in chapter 3
Installation.
Antenna Name
The antennas mentioned above are those typically currently supplied with the LD6. LD6's have
been supplied with other antenna types in the past. Please refer to section 4.1.7 for
information regarding legacy antennas.
Rev No: L10
Date: 03.04.2017
Ethernet Interfaces
USB Ports
Mouse
Keyboard
Connection to a compatible touchscreen monitor
Memory stick
Verify QC USB dongle
Monitor Video Port
Power Supplies

Antennas

V460
V86
FUC/6
2
10/100 Mbps
RJ45
Main Signal
L1/L2 GNSS
L-Band
UHF
Other Signal
L-Band, MF Beacon
MF
-
Page 40
LD6 Installation Manual