Combined L-Band/ Gnss Antenna Variant - Veripos LD6 Installation Manual

Document title: LD6 Installation Manual
Document No. AB-V-MA-00520
3.5.2
There is an option to use a combined GNSS and L-band antenna with the LD6 unit. To
utilise this option the combined GNSS/ L-Band antenna is connected to the L-Band
Input. A short coaxial cable terminated with TNC Plugs is then connected between the L-
Band module RF Output and the GNSS module RF Input (as shown below).
Rev No: L10
Date: 03.04.2017
Figure 20. L-Band antenna and GNSS antenna installation

Combined L-Band/ GNSS Antenna Variant

Figure 21. LD6 with Combined GNSS/L-Band antenna and link cable connected
Page 31
LD6 Installation Manual