Antenna Cables - Specifications; Summary Specification Of Module Receiver Cards - Veripos LD6 Installation Manual

Document title: LD6 Installation Manual
Document No. AB-V-MA-00520
4.1.8
Typically VERIPOS provide with the system pre-terminated cables and tails for use with
both L-band and GNSS/GPS antennas (see the 'Equipment Packing List').
VERIPOS recommend use of Times Microwave coaxial LMR cable for installation of all
antennas. See section 3.3 for further details.
4.1.9
4.1.9.1
Single channel L-Band modem.
•
•
Power Consumption
Nominal operation
Standby mode
Temperature range
Operational
Storage
Rev No: L10
Date: 03.04.2017
Antenna Cables – Specifications

Summary Specification of Module Receiver cards

L-Band Module (LBR-1)
Frequency range 1525–1559 MHz
Baud rate 1200
1.25W (not including any active antenna)
3.5mW
-40 to +70°C
-55 to +85°C
Page 47
LD6 Installation Manual