Assigning Ip Address And Configuring Administrator's Condition With Setup Program; Starting Setup Program For Webthru Swc 306; Configuring Administrator's Conditions; Assigning Ip Address With Arp Command - Samsung Webthru SWC 306 User Manual

2. Assigning IP address and Configuring administrator's condition with Setup program

1) Starting Setup Program for Webthru SWC 306

Click the "WebthruSetup.exe" file on
your PC. When the Setup Program is
executed, the setup program detects and
shows every Webthru connected on the
local network.
From the Webthrus listed, select one to
assign a new IP address. (Default is
211.53.133.92) To choose a Webthru,
click on its MAC Address or IP address.
When a Webthru is selected, its IP
address will appear in the 'Selected IP
Address' box. Type a password in the
"Admin.'s Password" box to change the
IP address, reboot Webthru, or start
configuration.
The default password is "admin".
To change the IP address, enter the
Admin.'s password
and click "Change IP Addr." Enter the new IP address and click "OK."
The "Reboot" button will reboot the Webthru. This process takes 10-20 seconds.

2) Configuring Administrator's Conditions

To access the Webthru's Administrator's Page from the Setup Menu, enter the admin.'s password and click
the "Start Configuration" button. (For more detailed information, refer to Chapter VII "Configuring
Administrator's Condition at Homepage")

3. Assigning IP Address with ARP command

1) Using ARP in Windows 98 and NT

When using Webthru with Windows 98 and Windows NT, follow the steps below.
• Open a DOS window and type the following commands.
arp -s <Webthru IP address> <Webthru Ethernet address>
ping -t <Webthru IP address>
• Example
arp -s 192.168.1.3 00-40-8c-10-00-86
ping -t 192.168.1.3
OK
11
Webthru SWC 306 User's Guide