Table of Contents
Advertisement
Preparation
Safety Precautions
Warning
If you do not follow the instructions,it may cause a serious physical damage.
Power Related
There is a risk of fire, electric shock or physical injury.
Use the AC adapter
authorized by the company
only. (DC 8.4V/1A)
Using an unauthorized AC adapter
may cause fire,electric shock or
malfunction.
Plug the power cable firmly
so that the power plug is not
loose.
Do not plug multiple
power cables into a wall
outlet.
Do not bend the power
cable excessively or place
a heavy object over the
cable.
Operation Related
There is a risk of fire, electric shock or physical injury.
Do not place metal matters over
SNT-1010 such as a screw driver,
coin, metal parts, etc.,or a
container filled with liquid.
Otherwise, it may cause fire, electric shock
or physical injury.
6
To avoid physical damage and loss of property, please
read and follow the safety precautions given below.
Do not hold the power plug
with a wet hand.
It the product emits smoke
or make a strange smell,
immediately disconnect
the power and contact the
customer service.
If you continue using this
product, it may cause a fire or
electronic shock.
In case of lightning or
thunder storm,
immediately disconnect
the power cable from
the wall outlet.
Otherwise, it may cause fire
or malfunction of the product.
Do not install the product in a
humid,dusty or sooty place.
Otherwise, it may cause fire or
electric shock.
Warning
If you do not follow the instructions, it may cause a serious physical damage.
Operation Related
There is a risk of fire, electric shock or physical injury.
Do not install the product in a place
where temperature is excessively
high (50°C or higher) or low (minus
10°C or lower) or a humid place.
Otherwise, it may cause a fire or electronic
shock.
Do not install the product in a
place where the direct sunlight
reaches or near a heater. Install
the product in an airy place.
Otherwise, it may cause fire.
Notice
If you do not follow the instructions, it may cause a serious physical injury or loss of property.
Operation Related
There is a risk of damage to the product.
Avoid dropping the product or
impact on the product.
There is a danger of damage to the product.
Keep the product away
from a shaking place or
magnetic matter.
There is a risk of damage to the
product.
Do not spray water
directly onto the product
for cleaning.
Otherwise, it may cause fire or
electric shock.
Do not disassemble, repair
or modify the product.
If the product does not work
properly, please contact your
product provider or customer
service center.
The company shall not be held
liable for the problem caused
by user's disassembly or
repair.
Do not move the product
while it is in operation.
Make sure to move or reinstall
the product after turning it off.
Clean the product surface
with a soft, dry cloth.
Never use chemicals or
cleansing solutions to clean the
product, because using them
may deteriorate or remove the
painting.
7
Advertisement
Table of Contents
