Table of Contents
Advertisement
V. Assigning IP Address and Configuring Administrator's Condition
1. Connecting Webthru SWC 306 to a PC
1) Connecting Webthru SWC 306 on Internet or LAN
Use the direct cable (white colored one) to connect Webthru SWC 306 to Internet or LAN. With this
connection, remote users will not be able to access Webthru until local user configures Webthru's network
setting.
Router
2) Connecting Webthru SWC 306 to a PC
Use the crossover cable (red colored one) to directly connect Webthru SWC 306 to a PC. This connection is
to be used to configure Webthru.
Internet
HUB
Connect Webthru to a
PC through a HUB.
Dedicated line, xDSL line, cable
modem line, and ISDN line are
available.
Direct cable
Crossover cable
Connect Webthru directly to
a PC through LAN ports.
10
Remote User
Local User
Webthru SWC 306 User's Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the Webthru SWC 306 and is the answer not in the manual?
Questions and answers