Creating Configuration Templates - Cisco XR 12000 Series Getting Started Manual

Wildcards, Templates, and Aliases
crc 32
!
keepalive disable
--More--
The following example shows how the state of all POS interfaces is displayed:
RP/0/0/CPU0:router# show interfaces pos* brief
--------------------------------------------------------------------------------

Creating Configuration Templates

Configuration templates allow you to create a name that represents a group of configuration commands.
After a template is defined, it can be applied to interfaces by you or other users. As networks scale to
large numbers of nodes and ports, the ability to configure multiple ports quickly using templates can
greatly reduce the time it takes to configure interfaces.
The two primary steps in working with templates are creating templates and applying templates. The
following procedure describes how to create a configuration template.
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
Cisco IOS XR Getting Started Guide for the Cisco XR 12000 Series Router
5-110
Intf
Name
PO0/1/0/0
PO0/1/0/1
PO0/1/0/2
PO0/1/0/3
PO0/1/0/4
PO0/1/0/5
PO0/1/0/6
PO0/1/0/7
PO0/1/0/8
PO0/1/0/9
PO0/1/0/10
PO0/1/0/11
PO0/1/0/12
PO0/1/0/13
PO0/1/0/14
PO0/1/0/15
configure
template template-name [($parameter $parameter...)] [config-commands]
Enter the template commands.
end-template
commit
show running-config template template-name
Intf LineP
State State
up up
up up
up up
up up
up up
up up
up up
up up
up up
up up
up up
up up
up up
up up
up up
up up
Chapter 5 CLI Tips, Techniques, and Shortcuts
Encap MTU BW
Type (byte) (Kbps)
HDLC 4474 2488320
HDLC 4474 2488320
HDLC 4474 2488320
HDLC 4474 2488320
HDLC 4474 2488320
HDLC 4474 2488320
HDLC 4474 2488320
HDLC 4474 2488320
HDLC 4474 2488320
HDLC 4474 2488320
HDLC 4474 2488320
HDLC 4474 2488320
HDLC 4474 2488320
HDLC 4474 2488320
HDLC 4474 2488320
HDLC 4474 2488320
OL-24755-01