ENCODER INTERFACE
2.6 Diagnosis/visualisation
The integrated serial interface provides the following functions:
•
•
•
Interface
RS485
RS232
Table 15:
Name
RS232 PC inverter (SubD-9 coupling - SubD-9 plug)
RS232/USB (USB serial converter inclusive cable)
Table 16:
Attention
2.6.1 Assignment of the interface X4A
Figure 10:
Parameterization of the unit with the KEB software COMBIVIS
Connection of a control operator
DIN66019II is used as communication protocol.
Specification
Common-mode voltage range 0...12 V
ANSI TIA/EIA-232
Serial interfaces
Connecting cable
No potential separation of the diagnostic interface to the control
voltage !
Malfunction or defect caused by voltage differences.
► Voltage differences > common-mode signal require potential equali-
zation line.
A current XML file is required for the operation with COMBIVIS 6. The download
can be done directly from COMBIVIS 6 while an Internet connection is present.
reserved
1
TxD (RS232)
2
RxD (RS232)
3
RxD-A (RS485)
4
RxD-B (RS485)
5
PIN assignment of the serial interface X4A
Connecting cable
0058025-001D
0058060-0040
6
reserved
7
DGND (reference potential)
8
TxD-A (RS485)
9
TxD-B (RS485)
27