Cell Area Code - AT&T TL86109 User Manual

Telephone settings
Telephone base settings

Cell area code

Most cell phone entries are stored in a 10-digit format. If all of your cell
phone entries are stored this way, you do not need to program your cell
area code.
If your cell phone stores entries in a 7-digit format, we recommend that you
program your cell area code so that your 7-digit directory entries can be
dialed correctly using your home line.
To set the cell area code:
1. Press the MENU softkey on the handset in idle mode to
enter the main menu.
2. Press CID or DIR to highlight Directory, then press
the SELECT softkey.
3. Press CID or DIR to highlight a desired downloaded
directory, then press the SELECT softkey.
4. Press CID or DIR to highlight Cell area code, then
press the SELECT softkey.
5. Use the dialing keys to enter the desired cell area code.
• Press CANCEL
• Press CID
to the right.
6. Press the SET softkey to confirm. You hear a
confirmation tone.
NOTE: If, in the future, your telephone service provider requires you to dial 10 digits
to make a local call (area code + telephone number), or, if you move to a location that
requires it, delete your home area code you have already programmed following the step
above. After you have delete the home area code, _ _ _ appears in the display.
to erase a digit.
to move the cursor to the left or DIR
45
Play messages
Answering sys
Directory
Cal l log
SELECT
DIRECTORY
Home
Cel l phone A
Cel l phone B
SELECT
CELL PHONE A
Review
Cel l area code
Last update
SELECT
CELL AREA CODE
On
---
SET