Message Playback - AT&T TL86109 User Manual

Answering system

Message playback

If you have new messages, the telephone plays only the new messages
(oldest first). If there are no new messages, the telephone plays all messages
(oldest first).
When playback begins, the handset screen displays PLAYING MESSAGES
and you hear the total number of messages followed by the day and time
of the message. After the last message, the telephone announces, "End of
messages." and the screen displays End of messages. If the recording time is
less than three minutes, you hear, "Less than three minutes to record." (see
Message capacity on page 106)
To listen to messages with a handset:
1. Press the MENU softkey in idle mode.
2. Press the SELECT softkey to select Play messages.
3. Press CID or DIR to select Mailbox 1 or Mailbox 2, then press the
SELECT softkey.
4. If there are new and old messages, press CID or DIR to select Play new
msgs or Play old msgs and then press the SELECT softkey.
Options during playback:
• Press EQ
• Press VOLUME
Press 6 to skip to the next message.
•
• Press 4 to repeat the message currently playing. Press 4 twice to listen
to the previous message.
• Press 3 to delete the current message. The system advances to the
next message.
Press 5 to stop.
•
To listen to messages with the telephone base:
1. Press MAILBOX/LINE 1
on line 1 or line 2 respectively.
Options during playback:
• Press VOLUME
• Press /SKIP to skip to the next message.
• Press /REPEAT to repeat the message currently playing. Press
/REPEAT twice to listen to the previous message.
• Press /DELETE to delete the current message. The system advances
to the next message.
• Press MAILBOX/LINE 1
messages on line 1 or line 2 respectively.
button to adjust the message playback audio quality.
to adjust the speakerphone volume.
or MAILBOX/LINE 2
to adjust the speaker volume.
or MAILBOX/LINE 2
108
to listen to messages
to stop listening to