Paired Devices; Rename A Paired Device - AT&T TL86109 User Manual

Bluetooth
Bluetooth setup

Paired devices

All paired devices are stored on the Paired devices list. Up to four devices
(cell phones and headsets) can be paired with the telephone base.
To use a paired device, it must in the active list (page 21) and connected.
Once you have paired a device with the telephone base, you do not need
to repeat the pairing procedure again unless you delete the device from the
paired devices list.
NOTE: Only the first 15 characters of the device name are shown on the paired
devices list.

Rename a paired device

You can change the name of a paired device on the paired devices list.
1. Press the MENU softkey on the telephone base in idle
mode.
2. Press CID or
the SELECT softkey.
3. Press CID or
press the SELECT softkey.
4. Press CID or
necessary, then press the OPTION softkey.
5. Press CID or
the SELECT softkey. The screen displays ENTER NEW
NAME.
6. Use the dialing keys to edit the name (page 84).
• Press CANCEL to erase a character.
• Press CID
to the right.
7. Press the SELECT softkey to confirm. The handset
displays Device renamed.
DIR to highlight Bluetooth, then press
DIR to highlight Paired devices, then
DIR to highlight a device when
DIR to highlight Rename, then press
to move the cursor to the left or DIR
19
Answering sys
Directory
Cal l log
Bluetooth
SELECT
BLUETOOTH
Add headset
Active devices
Paired devices
SELECT
PAIRED DEVICES
Headset A
Cel l phone A
Bluetooth
INFO OPTION
Disconnect
Rename
Remove paired
BACK SELECT
ENTER NEW NAME
SELECT
Headset A _
NEXT
BACK SAVE