Hold; Equalizer - AT&T TL86109 User Manual

Telephone operation
Options while on calls

Hold

You can place a home or cell call on hold. You hear
an alert tone if you have not taken the call off of
hold after 14 minutes. You hear another alert tone 30
seconds later. At 15 minutes on hold, the call on hold
automatically disconnects.
To place a home call on hold:
• Press HOLD on the handset or telephone base.
L1>On hold or L2>On hold appears on the handset
and telephone base and LINE 1/
LINE 2/
FLASH
LINE 2 on the telephone base flash.
To resume a home call on hold:
• Press LINE 1/
handset or LINE 1 or LINE 2 on the telephone
base.
To place a cell call on hold:
• Press HOLD on the handset or telephone
base. CL>On hold appears on the handset and
telephone base and
flash.
To resume a cell call on hold:
• Press CELL on the handset or CELLULAR

Equalizer

The equalizer feature on the handset enables you to change
the quality of the handset audio to best suit your hearing.
While on a call, or listening to a message or announcement,
press EQ to select the equalizer setting Treble 1, Treble 2,
Bass or Natural (the default setting) for the handset. The
current setting is shown on the handset for two seconds.
NOTES:
1. The equalizer feature does not apply to the speakerphone on the
telephone base or the connected Bluetooth headset.
2. If you switch the call between the handset and speakerphone by pressing
the audio setting remains unchanged.
3. The current equalizer setting remains unchanged until a new setting is selected.
on the handset and LINE 1 or
or LINE 2/
FLASH
CELL and CELLULAR
or
FLASH
on the
FLASH
on the telephone base.
68
/SPEAKER,