Cell Area Code - AT&T CLP99183 User Manual

Telephone settings
Handset and telephone base settings

Cell area code

Most cell phone entries are stored in a 10-digit format. If all of your cell
phone entries are stored this way, you do not need to program your cell
area code.
If your cell phone stores entries in a 7-digit format, we recommend that you
program your cell area code so that your 7-digit directory entries can be
dialed correctly using your home line.
To set the cell area code:
1. Press MENU
main menu.
2. Press or
CID
or
q
CALLER ID
highlight Directory, then press
3. Press CID or DIR on the handset, or press
or
q
CALLER ID
highlight the desired downloaded directory, then press
OPTION
.
4. Press or
q
CID
areacode, then press SELECT. The screen briefly shows
Only for 7 digit dial from CID.
-OR-
Press q
CALLER ID
area code, then press SELECT. The screen briefly shows Only for 7 digits
dialing from Caller ID log.
5. Use the dialing keys to enter the desired cell area code.
• Press
MUTE
base to erase a digit.
• Press and hold
telephone base
6. Press SAVE to confirm. There is a confirmation tone. The handset screen
shows Areacode will not show in CID and the telephone base screen
shows Area code will not show in Caller ID log briefly before returning to
the previous menu.
on the handset in idle mode to enter the
on the handset, or press
DIR
on the telephone base to
p
DIRECTORY
on the telephone base to
p
DIRECTORY
on the handset to scroll to Cell
p
DIR
or p
DIRECTORY
/DELETE on the handset, or X/DELETE on the telephone
/DELETE on the handset, or X/DELETE on the
MUTE
to erase all digits.
SELECT .
on the telephone base to scroll to Cell
44
CELL AREACODE
- - -
BACKSP SAVE
CELL AREA CODE
- - -
SAVE
BACKSP